2020 Roof Inspection Costs
Written by webtechs

2020 Roof Inspection Costs

If you’re searching for “Roof Inspection Cost” you’re one of the hundreds of Americans searching for that phrase every day. A roof inspection helps ensure that one of the most important elements of your home is in tip-top shape.

Average Roof Inspection Cost

The average costs in Arizona for a roof inspection is $317 with prices ranging from $176 to $464 in the typical range and on the very low to high ends, $100 to $988 for the state in 2020.

How Much Does A Roof Inspection Cost?

Roof inspections are typically done by a calculation based on square footage, flat rate, or free. For roofing companies that charge to do roofing inspections multi-level roofs, or those that are steep may cost more.  Some roof inspectors are also employing the use of drones to inspect elements of the roof.

The cost of roof inspection will also vary depending on travel time. If your property that needs to be inspected is outside of the city or normal service area for your inspector, there can be an extra charge of about $60.

What Does A Roof Inspector Look At?

Typical roof inspections include examining the underlayment, drip-edge flashing, counter flashings, and shingles to make sure they were all installed correctly and are in good condition.  All these elements play into if your roof is watertight.  The inspector is also likely to get into your attic to check the underside of the roof, which is called the “decking”. They keep a training eye out for any signs of a water leak inside your roof.

Types Of Roof Inspections

There are different reasons people call for roof inspections. They may have had leaks during the last rainstorm, many just want the peace of mind knowing that the roof is in good condition, and others may be getting ready to buy or sell a house.

There are also special roof inspections that focus on finding heat leaks around the roof. These special inspections are done using infrared cameras to “see” the heat leaking through the roof. In hot areas that rely on round the clock AC during the summer, these leaks can add up to a huge impact on utility bills.  In cases where there is significant air leaks repairs are recommended and insulation installation is recommended.

Professional Roofing Installation Services

Our team installs whichever roofing material you want the right way, the first time.  We strictly used the highest quality and longest lasting roofing materials to ensure our customer’s satisfaction. Paul’s Roofing can help with installation of flat roofingshingle roofingtile roofingspray foam roofing and more. Contact us for a quote or call us at 480-964-4006 for more information.

How To Fix A Roof Leak From The Inside
Written by webtechs

How To Fix A Roof Leak From The Inside

A roof leak will generally result from a heavy rainstorm, forcing homeowners to make repairs on the spot. If you are searching for “how to fix a roof leak from the inside,” then let this post serve as your guide. Keep reading to find out all the steps you should take to properly fix your leaking roof.

How To Patch A Leaking Roof

Heavy rainfall can quickly escalate into major roofing damage. Needless to say, time is of the essence whenever you notice a leak developing inside your home. Follow these four steps to efficiently fix any leakage.

  • Step 1: Get to the attic.
  • Step 2: Locate the leak.
  • Step 3: Make temporary leak patch.
  • Step 4: Map the leak.

Get To The Attic

The first step you need to take when attempting any repairs is find access to the attic and get to that area of the home. Start by removing insulation from the drywall, then removing any standing water gently with a sponge. To perform this task you must have a piece of plywood laid across the ceiling joists for your work area. Bring a bucket to wring the water into, as well.

Locate The Leak

Once you’re in the attic, the next step is to find exactly where the leak originated. Follow the path of the water as well as you can to find exactly where the leak is coming through. Often times, due to various roof shapes and slopes, the leak could have started much further away than it may appear.

Make Temporary Leak Patch

Once the leak has been located, homeowners can make a temporary patch from a piece of plywood or shingle with some roofing tar. Using a putty knife, carefully spread the tar into the leaking hole on the inside of the roof. Now place the shingle or plywood onto the tar. Spread more tar around the edging of your temporary patch.

Map The Leak

Use measuring tape to track exactly where the leak runs from. This is done so you can find the leaking pattern once the rain has stopped. You can also take the same actions to locate the leaky area on the outside of your roof, but please take the necessary precautions when on the roof. Add more tar to the area when completely dried, if you desire.

Trouble Finding Leak On Roof

Not being able to locate exactly where the leak is can be a common problem. You must act quickly, though, and cover the area with some sort of plastic covering. Roof plastic can be purchased at any hardware store. Buy some plastic covering and use some sort of wood to hold the plastic down once placed in the right location. First, cut the plastic to the exact length needed. Use a staple gun to attach the plastic to your wood anchors. Place the final covering on the roof while exercising caution in the attic.

Professional Flat Roofing Installation Services

Do you need a flat roof installed or repaired? Our team installs whichever roofing material you want the right way, the first time.  We strictly used the highest quality and longest lasting roofing materials to ensure our customer’s satisfaction. Paul’s Roofing can help with installation of flat roofingshingle roofingtile roofingspray foam roofing and more. Contact us for a quote or call us at 480-964-4006 for more information.

Flat Roofs Advantages and Disadvantages
Written by webtechs

Flat Roofs Advantages and Disadvantages

Flat roofs are common throughout Arizona and are favorable around the Phoenix Metro area for homes and businesses alike. It’s important you have professional roofing contractors for flat roof installation and repairs for your residence or business, because the roofs will also require special routine maintenance over time.

Advantages of Flat Roofs | Pros

Flat Roof Advantages Comprise of:

Its price. The most noticeable advantage for flat roofs is the price: the materials are less costly, because they don’t have any  curb appeal; the labor is less costly given that there is a reduced a risk in installing them, and flat roofs are quicker and easier for installation, lowering the overall labor. They also have reduced issues in damages and/or repairs, making it a lower expense over the lifetime of the roof.

Quick Installation. The next awesome advantage of having a flat roof is that because their installation is faster, there is less time to move in! Also, if there are any repairs in the future or when you inevitably need to have the roof replaced, the re-roofing installation process is typically fast and painless. You don’t have to clear your schedule and deal with roofers – a lot of roofing flat roofs can be installed in less than a day!

Enhances outdoor space. One other favorable advantage of flat roofs is the enhancement of useable outdoor space. When your property is on a small lot without much of a yard, a flat roof can be a excellent outdoor gathering space for entertaining guests or just relaxing. It is also the perfect place to start a rooftop garden, have solar panels installed to save on electric bills, or whatever else you may want!

Easily Maintained. Flat roofs are ideal for maintenance since they are a lot more safe and are easier to inspect regularly. Going over sidings, cleaning out rain gutters, or just repairing a hole becomes easy because there is less of a concern falling off of the roof every time you’re up there.

Disadvantages of Flat Roofs | Cons

Flat Roof Disadvantages Comprise of:

Attractiveness. Flat roofs are not thought of as attractive, and they most likely won’t blend as easy into a neighborhood as their pitched roof counterparts. Additionally, whereas they do offer more outdoor living space, they have the potential of less indoor living space, because there is no room for an attic or loft in the house.

No insulation. Flat roof structures have a lot less space for insulation and as a result, can be more impacted by extreme temperature differences.

Stability. Buildings that have flat roofs are less firm and their diminished ability to prolong weight naturally, so the roofing contractors will need to counterbalance somewhere else in the construction to give strength to the building.

Lack of roof drains. Flat roofs additionally do not drain like pitched roofs drain, so your roofing contractor will need to install additional drain systems to guarantee that the roof drains properly.

In Conclusion

Once you’re aware of the potential advantages and disadvantages of having a building that has a flat roof, you should be able to make a concise decision if you believe a flat roof is for you. One way or the other, give Paul’s Roofing a call and we will work together with you to design your new flat roof.

Professional Flat Roofing Installation Services

Do you need a flat roof installed or repaired? Our team installs whichever roofing material you want the right way, the first time.  We strictly used the highest quality and longest lasting roofing materials to ensure our customer’s satisfaction. Paul’s Roofing can help with installation of flat roofing, shingle roofing, tile roofing, spray foam roofing and more. Contact us for a quote or call us at 480-964-4006 for more information.

5 Tips to Prevent Roof Leaks
Written by webtechs

5 Tips to Prevent Roof Leaks

If you are looking for tips to prevent your roof from leaking, you’re not the only one, a lot of people are stepping-up for the prevention of damage to their homes, and, more importantly, their roofs. Leaky roofs aren’t just one of the more general repairs homeowners have to endure, but an expensive one. A lot of homeowners don’t have time, desire, or experience to get on their roof and look for problematic areas that can cause the roof to leak.

Roof Leaks Are Deceptive

Seeking out a roof leak is challenging because water spots over a room in your home hardly ever lines up with the actual roof leak. Home owners and roof repair contractors turn into sleuths to track down the path the water follows and discover where the water leak is coming from. Periodic roof inspections and routine maintenance helps to dodge leaks and costly repairs.

Roof Inspections & Maintenance Areas

The primary question that should be answered prior to examining typical leaky areas is, has the roof been compromised. Has there been severe weather, any pests around the home, trees that might have fallen over, or possibly any antenna or satellite installations or repairs? Each one of these has the possibility to puncture to the roofing and be the origin of leaks. It could be from cracked tiles or holes puncture in the underlayment and potentially the roof decking itself.

  1. Go Over Rooftop Installations, Chimneys, Plumbing, Skylights

Be on the lookout for anything coming through your roof. Anything appearing through your roof is a possible leak cause and will naturally hinder water from flowing freely off of the roof. Here are a few commonly leaky areas:

  • Antenna or satellite installations should be gone over to ensure that they are flashed adequately.
  • If your house has a fireplace, it most likely has a chimney, your chimney is a quite common source of a leaky roof, also. Flashings should be gone over along with any seals.
  • Plumbing vents are vital to your home but can be a potential leak source. Vent stacks should be gone over for cracks, failed and/or failing flashing, and if the seals are in satisfactory condition.
  • Your skylights are another common source of leaks as the top edges competes with roof water. Flashings need to be gone over along with the skylights overall condition.
  1. Go Over Your Gutters

The gutters on your roof play a substantial role in directing water off your roof and preventing damage to your house’s foundation. Gutters should be clear of any debris since they possibly could be a source of leaks when snow or rainwater has no place to go. Gutters should also be gone over to guarantee they are tightly fastened and correctly sloped enabling snow or rainwater will drain correctly.

  1. Go Over The Drip Edge

The drip edge on your house may appear to be just a visual detail on your house, but its role in diverting water away from the fascia and running off the roof is vital. Noting if your roof doesn’t have drip edge it can lead to roof leaks. Missing a drip edge, intense rainstorms can allow rainwater to get inside the roof and might cause the wood to deteriorate. Furthermore, your drip edges also aids in keeping pests from entering your home.

  1. Go Over Attic Contents

While snow and/or rainwater and impaired roofs are familiar roofing issues, components in your attic can also be troublesome like plumbing, condensation issues, A/C, inadequate ventilation, pest infestations, and/or vent fans. Be on the lookout for the below:

  • Inadequate ventilation allowing the attic to gather moisture and/or heat
  • Signs of mold on plywood in the attic
  • Intake vents clogged with insulation, paint or debris
  • Any signs of mold
  • Damp insulation when it hasn’t rained
  • Rust or blackish rings surrounding nails
  1. Go Over Step Flashings

A step flashing is generally installed where roofs join to walls and dormers. These areas may be troublesome and needs to be gone over. Step flashings also should be used for replacing anywhere mastic or second rate sealant was used to seal the roof.

Professional Roofing Installation Services

You’ve got a lot of great options for roofing materials.  No matter which roofing material type you choose Paul’s Roofing is here to help install it right.  Our team installs whichever roofing material you want the right way, the first time.  We strictly used the highest quality and longest lasting roofing materials to ensure our customer’s satisfaction. Paul’s Roofing can help with installation of shingle roofing, tile roofing, spray foam roofing and more.

Best Roof Underlayment For Tile Roofs
Written by webtechs

Best Roof Underlayment For Tile Roofs

If you want the best for your home you want to know that every element installed is the highest quality. Underlayment is the foundation for roofing. A lot of homeowners ask, “What is the best roofing underlayment?” For years roofers have been using felt paper as a type of underlayment whenever a roof is being replaced. Felt has been a time-proven and even approved option for many residential roofing systems, but does it actually mean that it is the best for every single case? In order to answer this question, we have to understand just what type of options are out there for underlayment and the value that is provided. At Right Way Roofing, Inc. we use an extremely strong underlayment to ensure your roof lasts longer than typical tile roofs. Most roofing companies use a cheap underlayment that will wear out in under 20 years. Our roofing underlayment is the best roof underlayment for tile roofs in Arizona and will last much longer due to its high-quality and comes with a 30-year warranty.

Synthetic Underlayment

This type of underlayment was made to be a replacement for felt. It is woven together using a polymer and polypropylene, which is vapor resistant and water-resistant type of underlayment. This type of underlayment is stronger is lighter than felt.

Roofing Felt

Roofing Felt is a type of felt paper that gets soaked in asphalt and other types of water-resistant mixtures that are able to produce a membrane. This is a bit more technical, but that is the basic idea about how it works. Roofing felt is often sold in either 30# or 15# rolls that are about 36 inches wide. In the past, the 15# roll was actually 15 pounds, but as time went by it has changed.

Rolled Roofing Underlayment

For the longest-lasting roofs instead of using standard underlayment rolled roofing can be applied. This stand-alone roofing system increases the durability and lifespan of your roof.  This is by far the best roofing underlayment option.  It can be installed directly on the decking before virtually any type of standard roofing from clay tiles to architectural shingles.

Reasons for Underlayment

In order to really decide what type of underlayment is going to be best, you have to understand what underlayment is used for and what it is able to do and what it is not able to do:

  • Temporary protection if there is storm damage
  • Vapor protection
  • Protection from resins in the decking which can damage asphalt shingles
  • Water-resistant, but not waterproof

Not all roofs will have to have the best underlayment on the market, and not all budgets can afford it. Standard shingles do not need the same type of vapor protection that could be needed for slate or metal roofs, but steep roof installation is safer with a walking surface that is made with synthetic underlayment.

A very common misconception by a homeowner is that underlayment is actually waterproof and that their roof can leak if it isn’t there. Even though the underlayment is water-resistant, it is not self-sealing, so water can get into every single hole that a nail has made. So, what underlayment is going to be best for your project?

Synthetic Underlayment

One of the main issues with using synthetic underlayment is the cost is more expensive per square foot when compared to felt. However, there are companies that have introduced new products that have competitive pricing and durability. Some of the biggest benefits for synthetic underlayment are:

  • Safer to walk on when installing shingles
  • Lays much flatter on the decking which prevents wrinkles that can happen when felt is used
  • Great for metal roofs
  • Vapor resistant and water-resistant
  • Stands up to high winds if shingles are blown off
  • Incredibly light

Roofing Felt

If you happen to be on a tight budget, then 15# roofing felt may be the right choice. Felt has been used for years and has really done well. Is there an even better option than felt? Yeah, but felt is still a really good choice. Also, felt has a really good fire rating and is very slow to burn.

How much will synthetic underlayment cost?

Most roofing quotes will use 15# felt as being the base option, so there isn’t an additional cost when it comes down to felt. But, getting a good quality felt roll can cost between $25 to $35 for materials and will cover around 450 square feet. Synthetic underlayment can vary between the brands, quality, and job applications. Many residential asphalt shingle roofs can be done using products that cost between $175 to $200 per roll when installed, but each roll will cover around 1100 square feet. Yes, the price can be different based on how it is applied, so ensure that you get exact pricing for the upgrade.

Professional Roofing Installation Services

You’ve got a lot of great options for roofing materials.  No matter which roofing material type you choose Paul’s Roofing is here to help install it right.  Our team installs whichever roofing material you want the right way, the first time.  We strictly used the highest quality and longest lasting roofing materials to ensure our customer’s satisfaction. Paul’s Roofing can help with installation of shingle roofing, tile roofing, spray foam roofing and more.

Saving Money On Roof Replacement Cost
Written by webtechs

Saving Money On Roof Replacement Cost

Replacing your roof can be a very expensive proposition. prices vary widely depending on where you live, the materials used and the simension and size of your roof. That being said, here are some money saving tips. Read on to learn more!

Homework

Understand the size and complexity of your roof and know the exact materials you want to have installed before talking to contractors. These details help keep estimates consistent and encourage competitive pricing. If you encounter the term “roofing square” while researching materials or getting estimates, know that one “square” equals 100 square feet of roofing material. And if you’re talking with a roofing contractor, installation and disposal fees probably are included in the estimate.

Shopping Around

Get quotes from several roofers and always request and check local references before hiring someone. Be wary of extremely low bids, which could mean sub-par work, and make sure they offer a warranty on materials and installation. Check with your local building department to confirm the roofers are properly licensed and insured.

Timing

Roofers are busiest in late summer and fall. Scheduling your roof replacement in late winter or spring may yield lower prices or off-season discounts.

Insurance

Homeowners insurance usually covers roof damage that’s not caused by neglect. If a hailstorm knocks some shingles loose, for example, your insurer may pay all or part of the replacement cost.

Working On it Yourself

Consider doing part of the work yourself. If you have the time, the proper equipment and a stomach for heights, removing old roofing before the installer arrives could help cut costs. Make sure your contractor approves before you break out the fork and roof jacks, though. It’s dirty, backbreaking and sometimes dangerous work, and you may have to arrange the disposal of the old materials on your own.

Overlays

An overlay involves installing new shingles on top of the existing ones. Because the old roofing stays put, overlays require fewer labor hours and cost less than replacement. Approach overlays with caution, however, as they may void or shorten the manufacturer warranty on roofing materials. And overlays typically increase future replacement costs since multiple layers will need to be removed the next time around.

 

Free Spray Foam Roofing Estimates In Phoenix, Arizona

Get a free spray foam roofing estimate in Phoenix by getting in touch with Paul’s Roofing. Paul’s Roofing is the Phoenix Valley’s premier spray foam roofing contractor with years of experience in the roofing industry.

2020 Roof Inspection Costs
Written by webtechs

Most Expensive Roofing Materials

Roofing materials are always a costly proposition but if you want the best and do not mind paying for it, read on to learn of the some of the best options.

Cedar 

Cedar shingles are a decent option if you’re going for a specific home style. These shake-style roofs are commonly found on Cape Cod, colonial and other historically-styled homes. Cedar shakes are very durable too. The Cedar Shake & Shingles Bureau says average lifespan of cedar shakes and shingles is 30-40 years, depending om climate to installation to storms. Even if the shingle itself lasts that long, however, that doesn’t mean they’ll retain their high-end appearance. Cedar as a roofing material is very susceptible to damage. Wood rots and burns easily, so you need to have cedar shakes specifically treated and installed in order to get them as water- and fire-resistant as possible, but even then they’re still at risk of damage. Plus, compared to the run-of-the-mill asphalt shingle, cedar shakes are up to six times more expensive – not always worth the upkeep costs and energy.

Slate 

Slate is by far the most expensive roofing material on the market. It’s ten times more costly than the average asphalt shingle as it pairs well in Gothic, Tudor, Chateau or other expensively styled, historic-looking homes. Since slate is stone, it’s  fire resistant and, depending on its mining location, can last from 60-200 years. However, stone becomes more brittle and less impact-resistant as it ages, and where the material is mined can have a huge impact on how well it holds up over the years. To find a good quarry, you’ll have to do a lot of research and pay the high price to have it shipped to you. Another issue that typically pops up with slate is slipping — when tiles slip out of place or fall out completely after installation. Low-quality manufacturing techniques, “over-nailing” and walking on the tiles during installation are the most common causes of slipping.

Professional Roofing Installation Services

You’ve got a lot of great options for roofing materials.  No matter which roofing material type you choose Paul’s Roofing is here to help install it right.  Our team installs whichever roofing material you want the right way, the first time.  We strictly used the highest quality and longest lasting roofing materials to ensure our customer’s satisfaction. Paul’s Roofing can help with installation of shingle roofing, tile roofing, spray foam roofing and more.

Spray Foam Roofing Cost
Written by webtechs

How Much Does Spray Foam Roofing Cost?

On average spray foam roofing costs $8,900 with average prices ranging from $4,800 to $13,000 in the US for 2020 according to multiple trusted online sources.

Paul’s Roofing is the premier spray foam roofing contractor in Phoenix offering spray foam roofing repair, installation, and re-coating. If you are interested in receiving an affordable spray foam roofing quote click here.

Spray foam roofing is the best type of roofing system for flat roofs. Just about 9 out of 10 flat roof owners in Arizona use spray foam roofing to cover their flat roofs. But how much does spray foam roofing cost?

Foam Roofing Cost According to FixR

FixR says foam roofing costs an average of $8,400 with average prices ranging from $4,800 to $12,000. FixR reports most homeowners spending an average of $4 to $5 per sq ft to install spray foam roofing, including labor costs.

  • $4800 to $6800
  • $8000 to $9000
  • $10000 to $12000
  • $4 to $5 per sq ft

Foam Roofing Cost According to Lyons Roofing

According to LyonsRoofing, foam roofing costs about $8,250 with average prices ranging from $4,800 to $12,000. LyonsRoofing reports most homeowners spending an average of $250 to $300 per square (1” of Foam) to install spray foam roofing, including labor costs.

  • $3,500 to $13,000+
  • $250 to $300 per square

Foam Roofing Cost According to Modernize

Modernize says foam roofing costs an average of $6,600 with average prices ranging from $6,000 to $7,200. Modernize reports most homeowners spending an average of $2.50 to $3 per sq ft or $250 to $300 per square (1” of Foam) to install spray foam roofing, including labor costs.

  • $6000 to $7200
  • $250 to $300 (1″ of Foam)
  • $2.50 to $3.00 per sq ft

Foam Roofing Cost According to DuraFoam

DuraFoam says the average cost to install spray foam roofing is about $7.50 per sq ft with average prices ranging from $3 to $12 per sq ft.

  • $3 to $12 per sq ft

Foam Roofing Cost According to Right Way Roofing

According to RightWayRoofing, the average cost per sq ft for foam roofing is about $5.50 per sq ft with the average homeowner paying around $6,300 for a 1200 sq ft home, and the average commercial facility owner paying about $55,000 for a 10,000 sq ft facility.

  • $5.50 per sq ft
  • $55,000 for a 10,000 sq. ft. commercial facility
  • $6,300 for a 1200 sq. ft. home

How Much Does Spray Foam Roofing Cost In Arizona?

  • Residential Spray Foam Cost: $6,300
  • Commercial Spray Foam Cost: $55,000
  • Foam Roof Cost Per Square Foot Installed: $5.50
  • Spray Foam Material Cost: $2.75 sq ft
  • Spray Foam Labor Cost: $2.50 sq ft

Residential Spray Foam Roofing Cost

Estimates are based on a 1200 sq ft home in Arizona

The average residential spray foam roofing cost in Arizona is around $6,300. This is considering that you don’t opt for extra UV ray blockage. Adding on a special UV protection layer will increase the cost by about 30%.

Commercial Spray Foam Roofing Cost

Estimates are based on a 10,000 sq ft commercial facility in Arizona

The average commercial spray foam roofing cost in Arizona is around $55,000. This is also considering you don’t add on an extra layer of UV protection. Similar to scenario above, adding this protection layer will increase your installation cost by over $16,500.

How Much Does Foam Roof Cost Per Square Foot?

The cost of spray foam roofing per sq ft is broken down into two categories: Spray foam material costs and spray foam labor costs.

Spray Foam Material Cost

Spray foam roofing is not based on sq. footage, rather, it’s based on the cost per square. Each square is equivalent to 100 sq ft or 10×10 area. So, the cost per square of spray foam roofing is around $275 average. And, since each square is 100 sq ft, you can easily divide that number by 100 to find the single foam roof cost per sq ft which is $2.75.

Spray Foam Installation Labor Cost

Most roofing contractors will charge you are 2-3 dollars per sq ft to install a spray foam roofing system.

Material & Installation Costs Combined

You can expect to pay around $4.75-$5.75 per sq ft of foam roofing installed by a professional roofing contractor.

Not All Roofs Are Created Equal

The size of your roof will affect the cost

Above you see an estimate of around $6,000 to install a spray foam roofing system on your house. But that’s only if your home is around 1200 sq ft. Should your sq footage be larger than that, you can expect to pay more for your roofing system. Here is an easy guide that will list the most common sizes of residential properties in Arizona and their total roofing material and installation costs.

Type City AVG Sq Footage Cost
Home Avondale 1909 $10,499
Home Chandler 1836 $10,098
Home Gilbert 2041 11,225
Home Glendale 1710 9,405
Home Goodyear 2090 11,495
Home Mesa 1569 8,629
Home Peoria 1870 10,285
Home Phoenix 1584 8,712
Home Queen Creek 2066 11,363
Home Scottsdale 1954 10,747
Home Surprise 1870 10,285
Home Tempe 1592 8,756
Home Phoenix Metro Poliatan Area 1762 9,691

Foam Roof Recoating Cost

Foam roof recoating cost an average of $8,250 with the lowest cost being around $3,500 and the highest cost being $13,000. Your total cost will be based on the square footage of your roof. The bigger your roof is, the more recoating it will cost.

Free Spray Foam Roofing Estimates In Phoenix, Arizona

Get a free spray foam roofing estimate in Phoenix by getting in touch with Paul’s Roofing. Paul’s Roofing is the Phoenix Valley’s premier spray foam roofing contractor with years of experience in the roofing industry.

Foam Roof Recoating Cost
Written by webtechs

How Much Does Foam Roof Recoating Cost?

On average, foam roof recoating costs about $1.30 per square foot or about 27.5% of the total cost of your original foam roofing system installation. The average cost of a new foam roof coating is about $8,250. Costs range from $3,500 to $13,000 depending on your roof size, complexity, and the roofing company you hire.

Foam roof recoating usually costs about 25% to 30% of the original cost of the foam roofing system. For example, if your original foam roofing system cost $8,250, your foam roof recoating cost is about $2,062 to $2,475.

Foam Roof Recoating Cost Per Square Foot

Foam roof recoating costs about $1.18 to $1.42 per square foot. Learn more about spray foam roofing costs. This is not an actual quote for your foam roof recoating project. To get an actual quote contact Paul’s Roofing today.

How Often Should I Recoat My Foam Roof?

Roofing experts say it is best to recoat your roof 5 years after the original installation. After that, you won’t have to recoat your roof for another 15 to 25 years. Waiting too long to get your roof recoated the first time will create additional issues that will cost you more money.

Paul’s Roofing Offers Foam Roof Recoating In Many Areas Of Arizona

Get a foam roof recoating estimate in Phoenix, Mesa, Glendale, Gilbert, Chandler, Scottsdale, and more by getting in touch with Paul’s Roofing today. Paul’s Roofing is an experienced foam roofing company offering spray foam roof repair, foam roof replacement, and foam roof installation in the Phoenix Metropolitan area of Arizona.

Best Roofing Material Types 2018 Pictures
Written by webtechs

Best Roof Material Types 2018 (W/ Pictures)

For Arizona property owners that are thinking about replacing their roofing, there are a number of options.  Before choosing which type of roofing to have your roofing contractor install, you should carefully consider the following different roofing material types.

Tile Roofing Material

Tile Roofing Material

Homeowners, business owners, and architects prefer tile roofing as it adds visual appeal that is as timeless as it is durable.  The durability of tile roofing is one of the longest and offers homeowners a long lasting affordable roofing material option.  Tile roofing is available in a number of different material options from metal and clay tile to Spanish tile and asphalt.

  • Clay Tile – these tiles are strong, durable, and have great visual appeal.
  • Metal Tiles – metal is always a durable yet somewhat heavy roofing option.
  • Spanish Tiles – these tiles are beloved as they have a style that’s considered timeless.
  • Asphalt Tiles – as one of the most affordable options it is popular nationwide.

Tile Roofing Advantages

In addition to being one of the most beautiful tile roofing options there are other advantages to it.

Insulation Advantage – Tile roofing offers property owners a shield from the summer’s intense heat.  It will help keep your home cooler than other roofing options.  This reduction in heat transfer will work with your insulation to help keep utility bills down.

Strong & Durable – A tile roof stands up to harsh weather better than the other various roofing options, with the exception of metal roofing.  Tile is great for monsoon season and is fireproof to help protect you and your family from the unthinkable.

Spray Foam Roofing Material

Spray Foam Roofing Material

Foam roofing offers property owners a number of great benefits.  It is made from polyurethane foam is is typically applied in a liquid.  After it has dried it creates a shingle layer that covers the entire roof.  One of the biggest advantages of foam roofing is that there are not any seams in the roofing.  Without seams there are far fewer potential areas that there could be leaks in your roofing.  Keeping water out is the primary job of your roof and protects the house and it’s contents from water damage and mold.

Foam roofing is very light weight, durable, and affordable to have installed.  This roofing material weighs about 50 pounds per square foot.  Various other types of roofing can weight as much as 500 lbs per square foot.  Another major benefit of foam roofing is that it helps insulate homes to keep them cooler in the summer!

Shingle Roofing Material

Shingle Roofing Material

Shingle roofing is by far one of the most common and widely used roofing materials.  This is due in part to how inexpensive it is, but also it is a recommended product by many architects and contractors.  One of the great things with shingle roofing is how many colors, styles, and designs the roofing material is available in.  Other roofing materials typically do not have as many options, so it becomes a popular option for homeowner’s wanting to stand out and make a statement.

While all roofing materials are engineered for maximum life span, shingles do wear out with age, weather, and mother nature’s influence.

Anyone considering having their roofing replaced needs to carefully choose a roofing contractor.  Experience, insurance, and licenses should be check to help pick a quality and reliable roofing contractor.

Roofing is worn out in extreme weather conditions, which are common in Arizona.  Over the years the drastic difference in temperature between summer and winter degrades your roofing dramatically.  Due to the special weather considerations and extreme summer heat local roofing companies understand the challenges and will be able to recommend a roofing type based on your budget, home, and preferences.

Spending some money up front in repairing, maintaining, or replacing worn roofing can and will save property owners thousands in potential repair costs.

Metal Roofing Material

Metal Roofing Material

While metal roofing is common in many areas of the united states, it isn’t as common in Arizona.  In the state it is more commonly installed in commercial, retail settings, and some residential settings.  In addition to being an incredibly weather resistant roofing material metal will help reflect heat away from your home.  This will help save you on cooling costs for many years to come.  Metal is a great roofing material that can handle just about any storm or extreme heat.

Metal Roofs Advantages

Metal roofing offers property owners a number of great advantages including: strength, lifespan, safety, environmentally friendly, and energy efficiency.

  • Stronger Roofing – Metal is no slouch when it comes to warding off the affects of storms, monsoons, and strong winds.
  • Longer Lasting – This type of roofing can last as much as 70 years which is far superior to the traditional lifespan of roofing that was only 12-20 years.
  • Energy Efficient – A metal roof with reflect the energy of the sun away from your home before it gets in.
  • Safer Roofing – Some roofing types are flammable, metal isn’t.  This helps protect properties and families.
  • Recyclable Roofing – Metal is one of the most recyclable materials on the planet and when your roofing wears out in 70 years it will be possible to simply recycle it.

Solar Shingle Roofing

Solar Shingle Roofing Material

As one of the newest and most exciting roofing options solar shingle roofing is made from photovoltaic cells.  It is engineered to look like it is simply a traditional roofing material.  Having made their debut in 2005  solar roofing shingles do cost more than a traditional roofing option, but also produce electricity. Your solar shingle roof will save you around 40% to 60% in energy costs.  While the installation of solar shingle roofing costs about $20,000 there are state incentives that can reduce the cost by as much as 50%.

Professional Roofing Installation Services

You’ve got a lot of great options for roofing materials.  No matter which roofing material type you choose Paul’s Roofing is here to help install it right.  Our team installs whichever roofing material you want the right way, the first time.  We strictly used the highest quality and longest lasting roofing materials to ensure our customer’s satisfaction. Paul’s Roofing can help with installation of shingle roofing, tile roofing, spray foam roofing and more.